Thursday, December 2, 2010

RE: [MW:8472] OPENINGS IN OR ADJACENT TO WELDS

Yes, follow the requirements of UW14.

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Santosh Gaikwad
Sent: Thursday, December 02, 2010 2:48 AM
To: materials-welding@googlegroups.com
Subject: [MW:8470] Joint Efficiency

 

Dear all,
my company is manufacturing ASME U Stamp vessel,as per the drawing one of the nozzle location is very closed to the dish head circumferential seam,even Dish head welding & nozzle welding are touching together .

is it acceptable as per ASME Sec VIII div I .

please do reply. 

--
Thanks & Regards.

Santosh Gaikwad


By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...