Re: [MW:8454] Regarding high managanese steel Gr III WELDING

Dear Vinit

with reference to composition given, Material shall be API X-70, to be 100% percent sure,please check required Tensile & yeild strength.

There are many manufacturers which you can find from internet,

Regarding Hardfacing of hardfacing on high manganese steel Gr III Base Metal, if you are planning to hardface with stainless steel elctrodes, it's recommended to go for GTAW Pulsed, else you can go for GMAW shortcircuit.


Regards,
Manpreet Singh
Welding Engineer
Spiecapag



On Tue, 30 Nov 2010 23:37:13 +0530 vinit vani wrote
>

Dear all I have two different issues. 1)we want to do hardfacing on high manganese steel Gr III Base Metal. Please share your experience on MAG Welding process for this material. Also please intimate any additional & valuable information regarding this. 2)Other issue is to know the applicableASTM Std for High Strength Low Alloy Cast Steelfor the chemical composition given below as well as supplier for this material in INDIA if any. Mn - 1.4 to 1.8 % Nb - 0.02 to 0.05 % V - 0 - 0.06 % Mo - 0.2 to 0.35 % c-0.10 to0.15% Please reply me promptly because the matter is urgent. Thanks & Regards Vinit

>

--
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.