you will find details here
On Tue, Nov 30, 2010 at 6:39 PM, Brl Pp <refazosaris@gmail.com> wrote:
Hi all
FOR PIPING WORKS:
What means R4 and R5 for the radiography? If the thickness is below 8
mm, which is chosen? R5 or R4
Best regards
Redouane (project engineer)
Algeria
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Manoj.Vernekar
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment