Wednesday, October 21, 2009

[MW:3529] Re: acceptable tolerences in plumb and level in pipe

+/- 3mm on spool lengths and attachments
+/- 1.5mm lateral translation
+/- 1.5mm rotational
+/- 1.0 mm out of alignment
Above is as per Engineers India Ltd specs
Regards
Aarpee

On Wed, Oct 21, 2009 at 11:08 AM, Sadique Sheikh <sadiq.mech@gmail.com> wrote:

Good morning to all group member.
I would like to as that how much deviation is acceptable in pipe
alignment for plumb and levelness?
Can we confirm alignment with level guage only or it has some
tolerences from codes?
Plz give me detail with references.
Thanks in advance.
Regards
Sadique
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...