Hi Nimesh
Use TIG process and filler wire:ER316, dia.1.2mm OR 1.6mm.
If you use ER316L, much better.
Regards
Prem Nautiyal
Cell:9820313278
On Fri, 09 Oct 2009 15:08:17 +0530 wrote
>
Dear All,
Kindly suggest which method to use for welding SS304 Tube sheet (6mm)
to SS316 Tube (25mm). It is for a chiller to operate at -40 Degrees C.
The pressure is only 2 bar. Also what consumable to use for filler
material / for MMA welding
Regards,
Nimesh S Chinoy
31, Mistry Industrial Complex,
Cross Road 'A', M.I.D.C.
Andheri(East), Mumbai -93
www.electronicsdevices.com
Tel :+91-22-26870313 / 318
Fax: +91-22-26874629
--
Nimesh S Chinoy
PREM S NAUTIYAL
CELL : 9820313278
 |
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
E71T-1C is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment