Monday, May 25, 2009

[MW:2234] Re: x-ray on 180degree elbow

In such cases, it is always wiser to turn to the client for advice / solutions. Many times, something is asked w/o looking for its feasibility - at least that is my exp. May be this one has a better solution.......

--- On Fri, 22/5/09, HAREESH K V <hareesh13h@gmail.com> wrote:

From: HAREESH K V <hareesh13h@gmail.com>
Subject: [MW:2226] x-ray on 180degree elbow
To: materials-welding@googlegroups.com
Date: Friday, 22 May, 2009, 3:21 PM


Dear Sir,

I am facing a problem in x-ray. we have 180 degree return elbow in our
heater coils of 4" size.As per client specification we have to take
X-ray for these joints. We have tried a lot but placing the camera
inside the elbow and getting the outer segment turned one side of the
film to white in colour.


Please give your valuable suggessions.

Hareesh K V

Explore and discover exciting holidays and getaways with Yahoo! India Travel Click here! --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...