Wednesday, May 20, 2009

[MW:2219] Re: NDT for valve body welded

As Body Seat is made with Overlay Welding that means its made for only Corrosion resistance Properties and the layering will be maximum 3-5 mm thk and during this important is their shouldn't be any crack in Layering and I feel PT is sufficient for Valve Layring and if your Thk is increasing then you can think of UT for Bonding and ...all
 
Abhijit

--- On Tue, 5/19/09, gabsi fathi <gabsif@gmail.com> wrote:

From: gabsi fathi <gabsif@gmail.com>
Subject: [MW:2216] NDT for valve body welded
To: materials-welding@googlegroups.com
Date: Tuesday, May 19, 2009, 8:21 PM

dear ِِAll
 
As you  know some valve manufacturers use body seat which is welded i.e. stainless steel overlay welds over ductile iron body usin MIG welding process. the NDT method used to inspect the weld is PT. My question is this enough and accepted or you need additional NDT test such as UT.
please let me know.


--
Meilleures Salutations.
Fathi Gabsi.


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...