Skip to main content

[MW:2157] Fw: [MW:2155] RE: 2154] Recertification of old consumables

By Materials & Welding

Dear Friends,

Suppose we have a consumables confirms to  Sec. IIC 2004 Edition, shall i use for jobs of 2007 without any recertification.

Regards
P.K
K.S.A
----- Forwarded by Kataiah/BelleliSA on 12/05/2009 08:51 ص -----
"John Du Plessis" <duplessisj@saiw.co.za>
Sent by: materials-welding@googlegroups.com

12/05/2009 07:33 ص
Please respond to materials-welding

       
        To:        <materials-welding@googlegroups.com>
        cc:        
        Subject:        [MW:2155] RE: 2154] Recertification of old consumables



No – Not good welding practice
 
John du Plessis
Technology Manager
Southern African Institute of Welding
+27 11 2982103 (T)
+27 11 8364132 (F)


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of kataiah@bilfal.com
Sent: 12 May 2009 06:19 AM
To: materials-welding@googlegroups.com
Subject: [MW:2154] Recertification of old consumables
 

Dear Friends,

Shall i use old consumables (10 Years old) to currents jobs (as per ASME 2007) without  any recertification.
if yes, Pl. provide code reference.

regards
P.K
K.S.A
0096543637487 <br




--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:36169] Cold Bending Qualification

By Materials & Welding
Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .
Post a Comment
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more