Hi,
-- Find the attached book will be useful to select the right product as per the grade specification .If you need further you can contact Bohler Welding Group Middle East Office or BWG Local Distributor .
Thanks & Regards ,
Muthu,
Bohler -Dubai .
Mb: +971 50 100 63 50
If you need further details visit www.bwgme.com
On Fri, Nov 5, 2010 at 10:19 AM, cyril andrews <jcyrilandrew@gmail.com> wrote:
Hi,
According to my knowledge I answered and attached some details to your
query. The pickling gel details are below and the percentage of water shall
be 1 part of gel with 3 parts of water or 1 parts of water. But i will be
provided in MSDS. Please check to it and proceed.
PICKLING GEL
The pickling gel is of two types,
1. Avesta Spray pickling gel 204.
2. Avesta Pickling gel 122.
3. Avesta BlueOneR Pickling Paste 130
4. Avesta Pickling Paste 101
5. Avesta BlueOneR Spray Pickle Gel 230
6. Avesta GreenOne Spray Pickle Gel 220
7. Avesta Spray Pickle Gel 215
8. Avesta Spray Pickle Gel 204
9. Avesta Spray Pickle Pump SP-25
10. Avesta Indicator 701
Spray Pickling Gel
Pickling Gel 204 (HNO3 15-25% & HF 1-8%) shall be used in general
areas. The pickling Gel applied on dry surface.
PASSIVATION AGENT
Passivation AGENT 601(HNO3 20-50%) shall be used. Trained and
skilled personnel will carry out the exercise.
Regards,
J.C.Andrews,
QA/QC Engineer,
Doha-Qatar.
hello !
for pickling and passivation for 304L matial which chemical to be
used ? and what is the ratio whith water of the chemical ?
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment