Thursday, November 11, 2010

[MW:8198] Repairs to the Aluminium Cylinderhead of a Vintage Car

November 11, 2010

 

Dear Friends,

 

The attached is a report of the repairs carried out on a Vintage Car's Engine's cylinderhead and the continuing problems of the same. The material is cast Aluminium and being a vintage car, replacements are not available. Cutting the present cylinderhead for making moulds for casting not acceptable to owner due to the risk of losing the cylinderhead for good ! We have described the problem and seek advice about Probable Solutions. 

Thanks in advance & B. Rgds.  

G. A. Soman

Principal

 

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...