Dear all,
I have a doubt in welding of Gr.11 material with Gr. 91 material.
The details are as follow:
Joint Type: Fillet weld
Material; SA 213 Gr. T91 with SA 213 Gr. T11
Process: GTAW & Also in SMAW
Consumable: For GTAW: ER 80S-B2 & for SMAW : E8018-B2
Preheating: 200°C
PWHT: 745° ± 15°C
In this welding, Whether there will be any metallurgical problem. If so what is the alternate for it.
M.Sivachidambaram
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34919] Welder qualification certificate
Dear All anyone can share a format for welder certificate and card format Thanks & Best Regards Saleem manhappulath Mob:+9665...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment