Re: [MW:33592] PAUT Instead of RT

Dear Sir,

Thanks for sharing the information.

This job will undergo RN1, SR1 & SR2 - Generally which stage will do the PAUT, No any information from client.

Thank You & Regards

Williams P Wilson

+968-94600828

QA/QC Engineer

Please consider the environment before printing this message

On Wed, Oct 12, 2022 at 7:32 AM srinivas rao <engr.srini@gmail.com> wrote:

PAUT can be used in place of  RT and allowed as per ASME SEC VIII DIV 1, check your weld quality before jumping to this mecthod and it is  better than RT and with more precision to detect defects. However  you need check with your NDT crew or your NDT sub contractors are they having compitent personal to perfrom  it is very important that the person who is  perfrom this shall be skilled enoughed to operate machines for  performing & interpreting results and all the welds in the vessel cannot have sufficient space on either side of the welds for scanning and hence interpretation of results may be difficult in case proper calibration and validation blocks are not place.

please refer ASME Code cases that are allowing  PAUT  in the lieu of RT 

you require to demostrate  PAUT mock up prior to NDE test to your client and AI. no of blocks will differ based on your scope take opion of your LEVEL III.

Thanks 

Rao

On Tuesday, October 11, 2022 at 2:37:32 PM UTC+4 anthony...@gmail.com wrote:

Yes it can be done

On Tue, 11 Oct 2022, 11:50 williams p wilson, <william...@gmail.com> wrote:

Dear Experts,

Please guide, RT can be replaced with PAUT for a vessel constructed with ASME Section VIII Div.1, MOC : SA 516 Gr.70, 70 / 80 mm Thickness.

Thank You & Regards

Williams P Wilson

+968-94600828

QA/QC Engineer

Please consider the environment before printing this message

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ5hNvmec_a_qxOBGp66-DVsdUR7mT3WHOvS-%3DKX_dq4vg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/efb6a491-23fc-430b-93df-b43510f270e3n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ7uweSkyQw3wm5UzY%3Da-g%3DCtXiUDA1Oehkx2Q8a%3D2-FqQ%40mail.gmail.com.