Re: [MW:33563] Internal Pressure Pipe Welding Hydro Test

This will be considered as non pressure part and hence no need to conduct RT 

On Sat, 8 Oct 2022 at 14:15, Sezgin Ckllı <euniversty@gmail.com> wrote:

Hi ! 

The picture below shows the internal pressure inside the tank of the pipe. Does it need to be radiographically tested according to Asme Sec VIII Div.1?

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a698c2f0-0cb2-44cd-93f6-a15de0664398n%40googlegroups.com.

--

Pravinkumar kurade

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM02rkfMWrw5UAQo%2BdGa5EJ97PVyrF8EGcg2_cjnOMAKJGL1gw%40mail.gmail.com.