Please refer this clause: 341.4 Extent of Required Examination and read between the lines for all classes of piping covered by B-31.3 code. This clause elaborated is as follows:
- 341.4.1 Examination — Normal Fluid Service.
- 341.4.2 Examination — Category D Fluid Service
- 341.4.3 Examination — Severe Cyclic Conditions.
- 341.4.4 Examination — Elevated Temperature Fluid Service
Thanks.
Pradip Goswami.P.Eng, IWE.
Independent Welding & Metallurgical Engineering Specialist
Consultant: SNC Lavalin Inc. (Nuclear &Non-Nuclear)
Saudi Aramco Approved Designated Project Welding Engineer (DPWR)
Qatar Petroleum Approved, SME-Materials & Corrosion Engineering.
Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/
Email:pgoswami@rogers.com,pradip.goswami@gmail.com
Cell/Whasapp:1-905-9793232
From: materials-welding@googlegroups.com <materials-welding@googlegroups.com> On Behalf Of Anand Elankumaran
Sent: October 3, 2022 2:43 PM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:33526] Piping NDE Requirements
Dear Team,
We are quoting on piping project as per B31.3,
During the tender we noted the point as
" All the Extend of NDE Shall be as per code requirement "
Can anyone tell us where the extent of NDE mentioned in the ASME B31.3.
As per my understanding all the NDE requirements shall be NDE class of piping.
Please advise if anyone knows of the above situation.
----
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANOYChxzag8Q6KzfjPf7q%3DGDY4EVSW_KBeaez%3DHrpBaaF_CzAA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/!%26!AAAAAAAAAAAuAAAAAAAAABVPzeizzeRJsiPziIE5jXQBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACk27j9RKvmSpY4WKUatRB3AQAAAAA%3D%40rogers.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANOYChwwXQiKTB%3DNuCY9WwP8dDih3%3D6BV6DRdvTOo_HwgSCW4A%40mail.gmail.com.
No comments:
Post a Comment