Re: [MW:33546] Impact Test Requirement : ASME Sec. VIII Div.1

Dear Williams ,

Test temperature generally it will be mentioned in client specification for impacting of procedures if client wants at different temperature based on their service requirements 

or else Test temperature will be the same as MDMT of base material 

for test specimen extraction refer UG-84 fig , number of specimens will vary based on welding procedures used during welding and thickness of deposition, way of welding - single side/double side

Thanks & Regard, 

Srinivas Rao

Welding Engineer 

On Mon, Oct 3, 2022 at 8:22 AM williams p wilson <williamswilsonp@gmail.com> wrote:

Dear Sir,

Wt will be the test temperature and the acceptance criteria to procure the material.

On Fri, 30 Sept 2022, 7:55 am Pravin Kurade, <pravinkurade@gmail.com> wrote:

Yes impact is required ref UG 84 chart

On Fri, 30 Sep 2022 at 09:08, williams p wilson <williamswilsonp@gmail.com> wrote:

Dear Experts, 

Please share the Impact Test requirements of SA 516 Gr.70 N , 80 mm thickness with a MDMT of -29 degree C.

Thank You & Regards

Williams P Wilson

+968-94600828

QA/QC Engineer

Please consider the environment before printing this message

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ7-ZGwD2T5SHytyTQndeSpueg2kxmG%3DJg5S6cKHMspPUg%40mail.gmail.com.

--

Pravinkumar kurade

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM02rkdw2eJee2Sf1V4KdByc1qRjTegFE1N10DqbgxmwLOnOLA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHBxnQ586Lpb4syCegm9fd6JfLE4QXKM%2BFVkfeaTxdfghKp2Mw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHdRSOPnpLjX0%2BC7kjexHWyVOkZcqFwuu72J4rXomyMNhod0_w%40mail.gmail.com.