Re: [MW:33558] RECERTIFICATION OF MATERIAL TEST CERTIFIACTE AS PER ASME

simply

first of all refer signed and approved QC manual ,refer material section .

For easy understanding refer below procedure-

Read  and refer ASME sec VIII div1 UG-10 for recertification 

1.first check that  ASME specification  Identical with  which ASTM Specification (eg in edition 2019 SA516 is identical which ASTM specification/year). check this in ed2019 only.

2.second check Identical  ASTM Specification is in range or not of acceptable editions  (Table II-200-1) ASME Sec II part A ed2021..check this in ed 2021.

3.Third if  Identical  ASTM Specification is in range of acceptable editions. simply stamp of recertification( ASME spec with editions spec with edition, date, sign, QA/QC engineer name and signature)

4. if  Identical  ASTM Specification is not in range of acceptable editions than make a table compare mechanical prop, chemical prop, heat treatment ,ASTM year of edition , grain type, number of mechanical test, orientation of specimen include all points given in certification of related specification and general specification(eg for SA516- refer SA 516 and SA 20 certification).

5.Write a note at end recertification done by following ASME sec VIII div 1 -UG-10 edition 2021.

6.Attach marking photos.

result- IF 2019 Edition values for mechanical prop, chemical prop and all other property satisfy need of edition 2021 use material by attaching all supporting docx-MTC,MIR,UG-10form.

IF 2019 Edition values for mechanical prop, chemical prop and all other property DIDNT satisfy need of edition 2021 have a words with AI go for testing and but testing will be useful only when chemical and heat treatment is as per req of 2021.

This is general procedure best to refer QC manual.

regards

sourav

On Fri, 7 Oct 2022 at 13:01, Saurabh Joshi <saurabh.joz30@gmail.com> wrote:

Dear All ,

     We have to manufacture a Heat ex-changer Code of construction ASME 2021(Code stamp required for the Equipment) . Raw material for plates & pipes are manufactured As per ASME 2019 . MTCs are available as per ASME 2019 and Original marking is still available on materials how can i re-certify the material and use it for the equipment which has the code of construction ASME 2021 .

Regards

Saurabh Joshi

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3f6c2884-c436-4ef3-9905-5e2c51713a72n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOWr6k_4mkGF7D4CvxDV_cKUeC2GNXh2TrPOpbzTacTgQHcYyA%40mail.gmail.com.