Tuesday, October 11, 2022

Re: [MW:33580] Internal Pressure Pipe Welding Hydro Test

Dear Sezgin,

                  Please refer to UW-2 (-a) for welded tubes & pipes internal. It is not considered under any category of UW-3. I hope it is correct & will assist you.

Thanks,

Kind Regards,

G.Gughan


On Mon, Oct 10, 2022 at 10:52 AM Sezgin Ckllı <euniversty@gmail.com> wrote:
Where can I find this explanation in Asme Sec.VII, can you explain this situation?

Thanks
10 Ekim 2022 Pazartesi tarihinde saat 06:25:35 UTC+3 itibarıyla Avanish Singh şunları yazdı:
For Internal Pipe , Don't Need to do Radiography.

On Sat, 8 Oct, 2022, 2:15 pm Sezgin Ckllı, <euniv...@gmail.com> wrote:
Hi ! 

The picture below shows the internal pressure inside the tank of the pipe. Does it need to be radiographically tested according to Asme Sec VIII Div.1?

Screenshot_1.jpg

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a698c2f0-0cb2-44cd-93f6-a15de0664398n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/5ab4f7e3-a15e-437e-8f35-033e96e55de5n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB0bcTPkOhAFgdaW55aVuwC1X649uHOtAp2G1ii-t-cEV4gU6Q%40mail.gmail.com.

No comments:

[MW:35439] Filler wire for welding off SA182F11 to SA268TP446

Hello experts Greetings for the day. Kindly please tell me what will be the filler wire for welding of SA182F11 to SSA268 TP446 Best regards...