--· Refinery, if so what units
· Petrochemicals
· Offshore O&G processing
Required corrosion tests could differ a lot based on the service environment. However you may take look at the attached data sheet and conclude what's the best to be recommended to your client. The highlighted tests may be of relevance.
Thanks.
P.Goswami.P.Eng, IWE.
Independent Welding & Metallurgical Specialist
Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/
Email:pgoswami@quickclic.net,pradip.goswami@gmail.com
Cell/Whasapp:1-905-9793232
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Hrushikesh Sangamnerkar
Sent: April 26, 2019 9:12 PM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:29515] Inconel 825 - Corrosion Test for PQR
Dear all,
What kind of Corrosion Test can be suggested to Client for Inconel 825, if no specific corrosion test is mentioned in Spec.?
MOC - Inconel 825
Design Temp - 158 ℃
Service - H2S + Chlorine environment
Regards,
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment