Re: [MW:29473] 40 mm root gap

To my knowledge ,its a fault in weld design .

On Thu, Apr 4, 2019, 16:23 Arun Padman <arunpadman0105@gmail.com> wrote:

Dear All,

 

I have a situation in which I need to qualify a WPS with 40mm root gap and 10mm base metal,

 

But the client is not ready to allow us to conduct the PQR, he need a technical clarification before we conduct PQR,

 

Is it allowed to weld 40 mm root gap with backing plate as per AWS D1.1, please help me. 

 

Regards,

Arun Padman Manayil

P  Save a tree. Please don't print this e-mail unless you really need to

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.