Is it plate . I assume it is ASTM-A-240 . You R right . Minimum requirement is 10 % . But what is the error or accuracy of PMI equipment . In my view , it can be accepted
On Thu, 28 Mar 2019 at 15:44, Sameer <sameer.landgebv@gmail.com> wrote:
Dear Experts ,--During PMI testing of SS316 material Ni observed - 9.86% , required range is 10-14%.observed value will be accepted or not . Please provide your valuable comments .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment