Rameez,
Look at ASME B16.5 flange face sections carefully.
Depth of allowable defects, especially axial ones are very small.
Normally you need to weld repair overlay and then re-mill to get the face acceptable.
Regards
Mac
-- Look at ASME B16.5 flange face sections carefully.
Depth of allowable defects, especially axial ones are very small.
Normally you need to weld repair overlay and then re-mill to get the face acceptable.
Regards
Mac
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/29d810ac-3b1f-4d6b-aedf-1c3ade9a76ca%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment