[MW:26474] Welding of aluminum 5083

Dear all

We have aluminum 5083 tank which have some small hopes in shell plates 

We prefer to go for injection wields to close these hopes 

Holes are in 5 mmm diameter 

Can you advice procedures and electrode to be used?

Regards 

HA

On Mar 17, 2017 3:33 PM, "Hani Al Masry" <hanyonalfy@gmail.com> wrote:

Dear All

Please advice we have to fabricate some pulling heads from pipes grades 

X60 and X65 with plates grade S355 

We proposed WPS for welding of X65 as the higher grade to be covered also for X60 and for S355 

Is these WPS 's are enough?or we need other?

HA

Regards

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKOkEzfEQx73UVqQGT98%2BzCXR356MFtQTaWfZNh0NsKv6vQjew%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.