RE: [MW:25908] 308/308L electrode

Treat it according to the manufacturer instructions.

 

Best regards

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of PUB:Rupesh Sao
Sent: sábado, 14 de janeiro de 2017 05:59
To: Materials & Welding
Subject: [MW:25888] 308/308L electrode

 

Dear All,

As far i know and used to not to backing of SS electrode, but it is found that on manufactures cover it show to re-dry up to 150-200'c.

If it is required to back;

In which condition (Atmospherics)

In any special coated flux electrode

or

we need to back all kind of 308 electrodes????

 

Please suggest.

 

Thank you all

Rupesh Ssao

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d1f3c1ad-e951-4f55-bd0d-43450c44e8a2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.