Because rolled plates have anisotropic properties.
Thinkba little bit on grains orientation and you will find out why
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: ABHISHEK SINGH <mech.abhi17@gmail.com>
Date: 14/01/2017 09:59 (GMT+02:00)
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:25888] PQR plate transverse to rolling direction of plate
Generally why it is preferred to cut PQR piece transverse to the rolling direction of plate.What is the technical reason behind this??
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/553dae23-e7b1-4100-874b-30038f99bf25%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment