Dear Experts,
Need your opinion for ERCoCr-A hard facing overlay on A276 410 ( with 2.5mm finished overlay thickness) by GTAW Welding Process.
1. What weld parameters required for welding.
2. PWHT requirement (time & temperature required).
Qualification standard is ASME Sec IX.
Thanks & Regards,
Brajendra S. Patel
Pune, India
cont:+917057406907
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAA9DSA-fgn_AkjsxgJ08B0MD%3DiH%2BC3DxbzVGA2sHXWSysmyrgw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment