Actually we are planning to carry out Pneumatic test of one of the BAHX (Brazed Aluminum Heat Exchanger ) at 76 bar (design pressure ). The test will be done by using Nitrogen. The nozzle material at IN and OUT is 304L. The A36 material has been used as end blinds for testing purposes which will be later cut out. The weld consumable used is 309L. The thickness of the blind has been rightly calculated as per the thickness of nozzle and pressure.
Query : The Nitrogen operating temperature will be much below -150F. My question is whether A36 is the right material chosen for the test blinds? This blind will be used only for temporary purpose and the total testing time including filling will be completed within 4 hours.
Hope to see your as usual support for the members of material group and looking forward for a quick response.
Thanks and Regards
Vino Varghese
Qatar
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/682e9abb-0bec-4347-bc1a-3b94dd848176%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment