Re: [MW:25981] ERCoCr-A hardfacing Overlay on SS410

this combination is not generally recommended as it always lead to weld crack.

Could you provide more info. on  why you chose 410 Grade.

On Wed, Jan 25, 2017 at 12:17 PM, Brajendra Singh <brajendrasingh523@gmail.com> wrote:

Dear Experts,

 

Need your opinion  for ERCoCr-A hard facing overlay on A276 410 ( with 2.5mm finished overlay thickness) by GTAW Welding Process.

 

1. What weld parameters required for welding.

2. PWHT requirement (time &  temperature required).

 

Qualification standard is ASME Sec IX.

Thanks in advance

Thanks & Regards,

Brajendra  S. Patel

Pune, India

cont:+917057406907

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAA9DSA-fgn_AkjsxgJ08B0MD%3DiH%2BC3DxbzVGA2sHXWSysmyrgw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

Regards

Baskaran Subramaniyan

+919884434742

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADFcTkkwnc_TrybiZS6%2BudupkFL1%3D-ot8RQRXsgsqVPo3k5VCQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.