For GMAW, no code/std restricts on weaving width
On 18-Jan-2017 8:54 pm, "Prasad Rode" <purode333@gmail.com> wrote:
Dear,
6mm throat fillet with single layer will leads to more weaving.
As a general thumb rule, weaving should not be more than 3 times of electrode dia.
Weaving leads to increase chances of crack and decrease the toughness in welding. Means leads to weak welding.
In short, for 6 mm fillet weld, u have to do first root weld and then multi weld over it.
Multi layer welding,gives strength to weld. It is always be good.
Regards
Prasad
--
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ .2c11bf01-fd7f-4d34-b6bd- 0a2a7826339f%40googlegroups. com
For more options, visit https://groups.google.com/d/optout .
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eOpqJujZPstwNfFj_7ufhuctDzfK9VU_2d8%3DE1ET%2BtmXg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment