No it is not. For every configuration you should draft a specific WPS. However a WPSS for socket welds could be supported by a PQR done on button welds if all essential variables are within PQR approval range
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: materials-welding@googlegroups.com
Date: 17/01/2017 13:00 (GMT+02:00)
To: materials-welding@googlegroups.com
Subject: Re: [MW:25914] Socket Weld WPS
Yes applicable for socket weld " fillet weld"
Ahmed Elsharkawy| QA/QC Engineer.
BV Representative Amal platform C project.
® Bureau veritas.
Mobile: (+20) 01110423873
Email: Ahmad.Sharkawy88@gmail.com
BV Representative Amal platform C project.
® Bureau veritas.
Mobile: (+20) 01110423873
Email: Ahmad.Sharkawy88@gmail.com
On Jan 17, 2017 11:40 AM, "Ali Hayat" <alihayat01@gmail.com> wrote:
Dear All,--
Does butt weld WPS is applicable for socket weld? Can anyone provide ASME IX code reference for this ?
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ .0490206d-a0a5-4fdd-a513- 645d5fc1eaad%40googlegroups. com
For more options, visit https://groups.google.com/d/optout .
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAK-7o_Mz8-%2B%3DuRQm9O_%2B%3DNLDZbZZ1Zgr_T%2BZg%3Dhf1iQOr2Cbnw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment