Dear sir,
You have to make a new WPS (say WPS-B) with the same PQR.
The issue in using the same WPS is, we cannot identify whether the joint is welded with full GTAW or with GTAW+SMAW.
Regards,
Hareesh K V
+91-8547859202
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: "Vanchinath S.A." <vanchinaths@gmail.com>
Date: 26/06/2016 2:10 pm (GMT+05:30)
To: materials-welding@googlegroups.com
Subject: Re: [MW:25005] COMBINATION PROCESS WPS
Revise WPS with existing PQR.
On 26 Jun 2016 2:07 p.m., "balaji srinivasan" <bolukbalaji@gmail.com> wrote:
-- Dear all,
We have WPS-A for stainless P8 to 08 witith Gtaw+ smaw thickness limit is gtaw 8mm and smaw 14mm.
Now our construction team is trying to weld only gtaw process for upto 8mm weld joints with same WPS -A .
Is it possible to use it or I want make new WPS for gtaw with supporting of same PQR.
Please advice.Regards,
--
Balaji.M
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAK1csg3c12yx1TKv2e017UVobthBT5YWAkD9UMGjC2ricpWbHA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2B6Tn1Lp92GHE1ok3kKyLOuvLqdAGEuzTE386BD-qUKV%3DQqtpA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment