[MW:24932] Re: welding of cladded (alloy 625) pipes with single side access

Hi Nikdin,

After buttering (around 1.5mm thick alloy 625 overlay), machine it and match both ID. Then weld the root and hot pass with GTAW (ERNiCrMo-3) then fill up passes with SMAW process. 

Dont deposit any carbon steel deposits on the groove. Even you use Carbon steel bullets for fit up will leads to crack of groove weld deposits.

On Tuesday, May 24, 2016 at 1:40:39 PM UTC+4, Himan Nikdin wrote:

Dear Experts

I need a practical guide or sample WPS for welding of cladded (alloy 625) carbon steel pipes with one side access. the size of pipes are minimum  4".

Regards,

H.Nikdin

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/99d3526d-ceee-4c8d-b57e-1b3d86161f51%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.