Can any one interpret for this for me ?
" All SS 317L pressure part components for the project shall be purchased confirming to min. allowable stresses of SS 316 L as per API 530 and should be dual stamped."
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a0c74603-5d1f-4a4e-8a08-ba7a75a98a7f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment