Re: [MW:23702] Weld in RA330

use same spec

THANKS & BEST REGARDS,

KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,

CONSULTANT-WELDING & QUALITY

On Mon, Oct 12, 2015 at 5:07 AM, Emilio Cerato <ecerato@hotmail.com> wrote:

Dear Friends.

I need weld an equipment whose base material is RA330.

Which welding process is more suitable?

Which filler metal is better?

What do you recomended for weld? preheat? heat imput?

Thanks for your help!!!

Emilio Cerato

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU173-W3689E2A3AE06CB0D90201CA4320%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePiB7HLGCtNT55j9LUahEvA5esW7XMyhs3gSJMEfF0oQQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.