Wednesday, October 7, 2015

[MW:23674] SS to BRASS Welding

Dear All,

Kindly advise me what welding material will be used to joint SS 304 to BRASS.

We used copper soldering method but the SS tube broken after welding..

Thickness of SS is 0.8mm. Pls find the picture...

Thanks in advance....

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/7051d20a-a6e8-4e84-afee-5d6cb653692c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35182] AWS D1.1 Material Groups and PQR Qualification

Dear Sirs, if we are qualifying a PQR with EN10025 S355JR to S355JR is this PQR qualifies to weld S355J2 to S355J2? -- https://mat...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...