Dear Sirs
Pls advise if it is acceptable to ASME B31.3 Code.
Base Material Group - P1 x 10" dia x Sch 160.
Weld Process- GTAW and FCAW.
Carried out RT after PWHT.
Found 30mm defect at 9 o'clock position . Repaired.
Can i perform localized reheat treatment overlapping defect repaired location at least 100mm on both ends?
Thanks
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/55ac0a8f-a5f2-4e24-9822-4d9b0f90a613%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment