Re: [MW:23600] Filler wire for EN 10088-2 X2CrNiN18-7 for (MAG -135 welding process)

Why not with NiCrMo type?

On 29 September 2015 at 12:35, Vijay Katkar <katkar.vijay22@gmail.com> wrote:

Dear All,

Need your guidance on subjected topic.

I need filler which will be use to weld X2CrNiN18-7 material (equivalent ASTM material 301NL (Which has 550 MPa minimum tensile requirement).

Generally we use ER 308L material to weld this material but as per EN 10088-2, we need minimum tensile value 650MPa.

Tensile value for Filler wire- ER 308L is 520MPa minimum. 

We have some PQR which is less than 650 MPA, so it can not be use.

I checked Filler wire MTC which has 610 MPa tensile value (less than requirement).

So which filler wire can be suitable to weld this material.

Please provide your valuable reply.

Thank you

Vijay Katkar

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVub%3DJhdMLghkvctJk%2BrcuK_e9WEYs2eSy_uecaAt6-ihPfA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.