[MW:23504] Re: Is it possible to qualify two welders on same test coupon

On Tue, Sep 22, 2015 at 5:05 PM, waqas suleman <waqas.suleman@gmail.com> wrote:

Dear All,

Can we use two welders for qualification of WQT using by combination welding (GTAW+SMAW) on single test coupon.

I used 16" pipe sch-30 for WQT. As per  ASME Sec IX, QW-306 my interpretation says it is possible.

Looking expert judgement from respected group members.

Regards,


Waqas Suleman
Construction Manager
Mobile # 00966 59 359 0798

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKhANKjhKdAjgkvr9qQevJAFHVyUCJ%2BSf6uWzFWkbNfrBrpEww%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.