Dear Gents,
What is the minimum thickness for PWHT in revision 2014.
Pl.guide me.
Thank you
karunakaran
On 9/22/15, george.dilintas@gr.bureauveritas.com
<george.dilintas@gr.bureauveritas.com> wrote:
> For one more time I recommend to read all the relevant chapter of the Code
> and not isolated paragraphs.
> So I would like to draw your attention also to the following paragraphs
> 132.1.2
> 132.2 (B)
> and to 132.4.2
>
> best regards
>
> Dr. Georgios Dilintas
>
> Authorized Nuclear Inspector
> Authorized Inspector Supervisor
>
> I&F REGIONAL TECHNICAL MANAGER
> BUREAU VERITAS PIRAEUS - GREECE
>
> Tel: +30 210 40 63 113 /4 /5
> Fax: +30 210 40 63 118
> Cell: +30 69 44 64 62 04
> This message contains confidential information. To know more, please click
> on the following link: http://disclaimer.bureauveritas.com
>
> --
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> To post to this group, send email to materials-welding@googlegroups.com.
> Visit this group at http://groups.google.com/group/materials-welding.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/OFE830CE67.C6D3555F-ONC2257EC8.002E0971-C2257EC8.002E85C5%40LocalDomain.
> For more options, visit https://groups.google.com/d/optout.
>
--
*S.KARUNAKARAN*
karunaqc@gmail.com
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHt4qw921sOtq%2B1BeUEr_giWu9_SP9DvMDbf%2BDOrXcnLH3k09A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment