I think these plates are stacked one over the other in open yard, probably in sea port. During night, the moisture condenses on the edges and slowly flows inside. Causing this type of surface corrosion.
2015-09-23 12:50 GMT+04:00 Mattia Degli Esposti <mat.degliesposti@gmail.com>:
--Dear Mehdi Vafakhah,I try to response to your question with a low number of informations. So I can make an assumption: the material has no defects, like segregation and wrong chemical composition.In this point of view, the reason of these defects is searchable in hot rolling parameters. Especially analyzing the photo 22222.jpg, it's clear that the metal couldn't follow the plastic deformation imposed by the process. So in my opinion defects are due to:- temperature too low- strain rate too high (attributable to an angular velocity of rolling cylinders too high)So, unless then problems related to the material, with a correction of these parameters (increase of T and/or decrease of angular velocity of cylinders), it gives to possibility to the steel to follow the imposed plastic deformation, in order to decrease the defects.RegardsMattia DE
Il giorno lunedì 14 settembre 2015 09:38:50 UTC+2, Mehdi Vafakhah ha scritto:Dear expertsCould you help me to identify the these defect. ( attached pictures )or refer a guide document that provide me more information about hot rolling defects.best regards.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/64cb2c88-8d25-48d8-bed9-c68c65ff2152%40googlegroups.com.
Regards,
Mr. Harish.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAE4SttF2Cz%3DpXeNRSCeLOu-HNscSLrWhEUOS8CP1mTEUNEZA%2Bg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Comments