Dear All,
Please clarify for electrode qualification test as per ASME Sec II Part C for E7018 Dia-4 mm, what are the test requirements?.
-- Please clarify for electrode qualification test as per ASME Sec II Part C for E7018 Dia-4 mm, what are the test requirements?.
As per Table 4, Fillet weld test piece is required for chemical analysis, RT, All-weld test & Impact test. Please clarify what table 4 is stating.
Further, if i make one Groove weld test assembly of 20 mm thick, is it sufficient for the electrode qualification?
Thanks & Regards,
Mohan Raj
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/021aa57f-3ee7-4f7f-98f5-e43c1122d570%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment