Monday, September 28, 2015

Re: [MW:23571] Re: Hardness without pwht

Yes hardness can be measured without PWHT on weld metal, its a Client/Specification/Service requirement.
Based on Client/PMS requirement the hardness shall be measured during the process of pipe manufacturing. Usually, after normalising, the hardness will be measured at pipe mill.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANiuf9fSt6eX51MPehRjEzHEHPvzfjhZ5L_uFdqMYLObjAOuHg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...