Thursday, September 24, 2015

RE: [MW:23523] RE: 23501] WRC Bulletin No 350

Sedef,

Its good for you to mind your language...Pradip is very knowledgeable , very active in our group and always ready to share his experience and knowledge..

One should show professionalism while communicating in group, if not better to keep quiet...

Not sure, is there any provision in our group to control such incident...

Regards

Bharat B. Gole



Date: Thu, 24 Sep 2015 18:20:14 +0530
Subject: Re: [MW:23518] RE: 23501] WRC Bulletin No 350
From: rthyagu@gmail.com
To: materials-welding@googlegroups.com
CC: santasatana@gmail.com

Sedef,

This is the common platform and mind your language.
Mr.Goswami is a highly knowledgeable and very respectable person in our group and guidance for us for a long time.

Thiyagu
 

On 24 September 2015 at 17:37, pgoswami <pgoswami@quickclic.net> wrote:
Sedef,
 
There're plenty of file sharing sites in the internet. If you're smart enough, spend time in Google and will your document.
LAST OF ALL COMMUNICATE LIKE PROFESSIONAL, HOW DARE YOU USE SUCH VULGAR LANGUAGE? 
 
 
Pradip Goswami, P.Eng,IWE
Welding & Metallurgical Engineering Specialist
Hamilton, Ontario, Canada
 


From: sedef pala [mailto:santasatana@gmail.com]
Sent: Thursday, September 24, 2015 6:43 AM
To: pgoswami
Subject: Re: 23501] WRC Bulletin No 350

Hi ,

Are you for real,  is it really copyrighted. What kind of nerd you are ? I see lots of posting in group which are copyrighted. Do not preach me  and go and copyright your fucking brain.

On Mon, Sep 21, 2015 at 11:42 PM, pgoswami <pgoswami@quickclic.net> wrote:
Hi,
 
These bulletins are copyrighted.Hence not advisable to share in public domain. Best  approach would be to buy from WRC.
 
Thanks.
 
Pradip Goswami, P.Eng,IWE
Welding & Metallurgical Engineering Specialist
Hamilton, Ontario, Canada
 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of sedef pala
Sent: Monday, September 21, 2015 11:06 AM
To: materials-welding
Subject: [MW:23501] WRC Bulletin No 350

Hi ,

 I am looking for WRC Bulletin No 350 - Design Criteria for Dissimilar Metal Welds
.

 If somebody has , please can share it .

Regards,

On Tue, Sep 15, 2015 at 7:04 AM, Kadir godil <kadirgodil@gmail.com> wrote:
Dear experts,

I wanted to know, if someone has cross verified and calculated the Impact energy shown by Charpy/Izod impact test machine?

Please share the calculation method if someone has.

Thank you

Sincerely,
Abdulkadir

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/64940184-17ce-4f5b-9206-b29c09f4d9c3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKWVd7X7x5ntmw9kHbz3_54_YJtSPYH1oQ63yUA5pi2%3DVr6AqQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/93C6E5E7E6E74DF7828289EF45EF803C%40homepg.
For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABYLr26uGS_HLQC2yiHkgTC6P%2ByZyyiEbmnpyN%2BFKbEPOzbizg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...