Dear Experts
Appl Code AWS D1.1
Weld Process - SAW in Flat and Horizontal Positions.
Item to be welded- T-Bar / I-Girders with thk range from 30mm and 50mm x Group II- EH36 Mat.
I was told it is possible to achieve FP without back-gouging
Is it possible? Pls guide me in qualifying PQRs with suitable welding consumables.
Thanks
-- Appl Code AWS D1.1
Weld Process - SAW in Flat and Horizontal Positions.
Item to be welded- T-Bar / I-Girders with thk range from 30mm and 50mm x Group II- EH36 Mat.
I was told it is possible to achieve FP without back-gouging
Is it possible? Pls guide me in qualifying PQRs with suitable welding consumables.
Thanks
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/3753d8de-49e0-4852-b1d4-8ede2b2122ff%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment