--As I understand from welding people even older than I; in the beginning days of welding, DC welding was performed with direct current power supplies with the electrode being the negative pole. As welding progressed some, people found that SMAW welding with cellulosic coverings "ran" better with the electrode positive or "reverse" polarity. This may be a true story or it may just be propagated mythology. At any rate -
For basic welding you can have an alternating current (AC) power supply or a direct current (DC) power supply. With DC you have two options: (1) electrode as the negative pole and the work piece the positive pole or (2) electrode as the positive pole and the work as the negative pole.
DC straight polarity (DCSP) is the same as DC electrode negative (DCEN). There may also be non-standard designations such as DC-, or DC-VE.
DC reverse polarity (DCRP) is the same as DC electrode positive (DCEP). Or similar to above, non-standard DC+, or DC+VE.
Hope this helps.
John A. Henning
Welding & Materials
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Anban
Sent: Tuesday, June 18, 2013 4:47 AM
To: materials-welding@googlegroups.com
Subject: [MW:17965] Clarification on Current and Polarity Abbreviations
Dear Experts
Pls enlighten me if thse abbr. are same and explain the correlation and difference
1 - DCEP x DC+VE x DCSP
2 - DCEN x DC-VE x DCRP
DCEP - Direct Curent Electrode Positive
DCSP - Direct Current Straight Polarity
DCRP - Direct Current Reverse Polarity
Appreciation in advance--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
______________________________________________________________________
The information in this email is confidential, and is intended solely for the addressee(s). If you are not the intended recipient of this email please let us know by reply and then delete it from your system; you should not copy this message or disclose its contents to anyone. The internet can not guarantee the integrity of this message. HAMON (and its subsidiaries) shall (will) not therefore be liable for the message if modified.
______________________________________________________________________
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment