From: Raghuram Bathula <raghurambathula@gmail.com>
To: materials-welding@googlegroups.com
Sent: Tuesday, 25 June 2013, 12:31
Subject: [MW:18026] Re: phased array vs. RT
To: materials-welding@googlegroups.com
Sent: Tuesday, 25 June 2013, 12:31
Subject: [MW:18026] Re: phased array vs. RT
http://www.linkedin.com/groupAnswers?viewQuestionAndAnswers=&discussionID=144891298&gid=122787&commentID=146402448&trk=view_disc&ut=1PWB0HnGhwYRM1
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Interesting discussion on the above topic
On Tuesday, December 7, 2010 1:30:16 PM UTC+5:30, Navid Navidi wrote:
-- On Tuesday, December 7, 2010 1:30:16 PM UTC+5:30, Navid Navidi wrote:
Hi all,
is it possible to use phased array technique instead of RT for NDT teast of a pressure vessels. YES
Does standard allow us to do so? Standard did not disllaow it.
what is its advantages? Many but mainly no radiation involved. However NDT technicians can cheat whether in UT or RT.
thank you in advance
Saeed
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment