Hi Sevak ,
Read the below from ASME-IX definitions for Interpass temperature and the location :
the highest temperature in the weld
joint immediately prior to welding, or in the case of multiple
pass welds, the highest temperature in the section of
the previously deposited weld metal, immediately before
the next pass is started.
Regards,
Saravanan
On Tue, Jun 18, 2013 at 1:50 PM, james gerald <gerry_tup@yahoo.com> wrote:
There are 2 locations you need to consider,1. For maximum temperature, you need to measure it on the Weld Bead2. For minimum temperature (minimum preheat to be maintained) you need to measure it 75mm from the weld toe on either side.Thanks & RegardsJ.Gerald Jayakumar
00968-99438165
Sent: Monday, June 17, 2013 3:54 PM
Subject: [MW:17950] Measurement of interpass temperature
Dear Experts,Can anybody explain at which location interpass temperature to be measured during welding ?Also what diference it will make in the weld metal property if we follow the wrong location of measurement of interpass temperature ?Is it written in any where in any code, where interpass temperature to be measured ?--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment