Re: [MW:17601] Regarding Kereosene Leak test

Dear Vinod

 

Thnaks for Suggestion ,

 

ButI have One Doubt , If you waited 24 hours On chock Surface for inspection.

There shall be possiblity to vaporize spray kerosense or Warsol in environment During 24 hours.

so no body inspector will allow  24 hours to inspect .

 

so as per my oponion , three hours is maximum time  for any liquid to comeout from  leak surface. and UP to 3 hours we can wait .

 

if you have any Concern on these  topic .let me know.

 

Thank You Very Much

 

Regards

 

Ritesh Rajput

On Wed, May 1, 2013 at 10:08 AM, Vinod Bhatt <vnbhatt@gmail.com> wrote:

Friends
Even kerosene is not allowed from environment or safety reasons.
In USA they use Warsol (kerosene like light gravity solvent).
If kerosene is not a concern you can apply white chalk (white wash) in outer periphery, fill with low gravity liquid eg kerosene and check outer surface after 24 hours.
If there is a leak, you will visually find dark wet spots.

Vinod Bhatt

---

From: veera raghava kommisetti <kommisetti@gmail.com>

Sender: materials-welding@googlegroups.com

Date: Wed, 1 May 2013 08:13:03 +0400

To: <materials-welding@googlegroups.com>

ReplyTo: materials-welding@googlegroups.com

Subject: Re: [MW:17597] Regarding Kereosene Leak test

It is generic test. just check for the leak on the otherside.

Alternative is Smoke bomb test (but presenlty not much in use)

On Tue, Apr 30, 2013 at 4:49 PM, balaji s <borntowin2k12@gmail.com> wrote:

Dear Experts,

 

Here our contractor fabricated the ducts for FDA.

 

To examine the weld quality Kerosene leak test to be done.

 

1.Anybody having the procedure for Kerosene Leak test.

 

2.For duct welding other than Kerosene test is available?

 

Please Suggest me.

 

Regards,

Balaji

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.