Even kerosene is not allowed from environment or safety reasons.
In USA they use Warsol (kerosene like light gravity solvent).
If kerosene is not a concern you can apply white chalk (white wash) in outer periphery, fill with low gravity liquid eg kerosene and check outer surface after 24 hours.
If there is a leak, you will visually find dark wet spots.
Vinod Bhatt
From: veera raghava kommisetti <kommisetti@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Wed, 1 May 2013 08:13:03 +0400
To: <materials-welding@googlegroups.com>
ReplyTo: materials-welding@googlegroups.com
Subject: Re: [MW:17597] Regarding Kereosene Leak test
It is generic test. just check for the leak on the otherside.
Alternative is Smoke bomb test (but presenlty not much in use)
On Tue, Apr 30, 2013 at 4:49 PM, balaji s <borntowin2k12@gmail.com> wrote:
--Dear Experts,Here our contractor fabricated the ducts for FDA.To examine the weld quality Kerosene leak test to be done.1.Anybody having the procedure for Kerosene Leak test.2.For duct welding other than Kerosene test is available?Please Suggest me.Regards,Balaji
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment