Dear sir if the vessel construction is as per ASME Sec.VIII , then the internals also will governed by same code.
if the vessel is required to do PWHT, it means along with internals only.
Regards
G.Sreenivas Rao
8978431177
On Thu, Feb 21, 2013 at 2:47 PM, krishna <wiqw@rediffmail.com> wrote:
Guys,
Pls put your comments for the below query
If a vessel is constructed as per ASME Sec.VIII then what will be the code of construction for
the internal pipes being used for that vessels?Will the pipes falls under Sec.VIII or B31.3?
Also is it required to do a pwht for that pipes if pwht is not a service requirement for vessel
and if the pipe wall thickness SA 333 Gr.6 exceeds 19mm ?
Is it allowed to use the wps in accordance with ASME SEC .IX and ASME Sec.VIII for piping of that
internal pipes and also for other piping jobs as per ASME B31.3 works.
krishna
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment