Dear,
According to QW-404.6, change in diameter of electrode is a non-essential variable(If there is impact test, change in dia greater than 6 mm is supplementary essential according to 404.7).
If no impact test is required, then you can just revise your WPS as per 200.1 (c ).
Thanks & Regards,
TEAM QA/QC- SHOAIBA II CCPP
S.Binoy, Welding Engineer
DAELIM Saudi Arabia Co. Ltd.
Email- binoy.spp@daelim.co.kr
Mob: 0592633853 / 0508308633
“Let Us Believe in TEAM Work (Together E veryone Achieves More)”
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of joydev dalai
Sent: Sunday, February 17, 2013 7:29 AM
To: materials-welding@googlegroups.com
Subject: [MW:16785] WPS preparation of 48" API 5L x46 pipe.
Dear all,
I have problem for preparation of WPS for 48" API 5L X 46,12.7mm wt. pipe, the WPS criteria meet as per ASME. We are suggest for E6010-3.2 mm dia electrode for Root pass, but our client can't accept for it.
They have suggest for E6010 - 2.5mm dia electrode.
so please suggest me
joydev dalai
Sr. Engg(QA/QC)
Fernas construction india Ltd.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment